Hp Laserjet 3050 Manual Feed Print Not Feeding

Check 1:Make sure of the following when you load paper

• When loading two or more sheets of paper, flip through the paper before loading.

• When loading two or more sheets of paper, align the edges of the sheets before loading.
• When loading two or more sheets of paper, make sure that the paper stack does not exceed the paper load limit. However, proper feeding of paper may not be possible at this maximum capacity depending on the type of paper or environmental conditions (either very high or low temperature and humidity). In such cases, reduce the sheets of paper you load at a time to less than half of the paper load limit.
• Always load the paper in portrait orientation, either in the Rear Tray, the Cassette, or the Manual Feed Slot of the Front Tray, regardless of the printing orientation.
• When you load the paper on the Rear Tray, load the paper with the print side facing UP and slide the Paper Guides to align with the both sides of the paper.
• When you load the paper on the Manual Feed Slot of the Front Tray, load the paper with the print side facing DOWN and slide the Manual Feed Paper Guides to align with the both sides of the paper.
• When loading paper in the Cassette, load the paper with the print side facing DOWN and slide the Paper Guides to align with the both sides and bottom edges of the stack.

Check 2: Check to see if the paper you are printing on is too thick or curled

Media Types You Cannot Use

Do not use the following types of paper. Using such paper will cause not only unsatisfactory results, but also the printer to jam or malfunction.

See[Media Types You Cannot Use ]

Paper Is Smudged/Printed Surface Is Scratched

See[Paper Is Smudged/Printed Surface Is Scratched]

Check 3: Make sure of the following when you load envelopes

When printing on envelopes, refer to [ Loading Envelopes ] and prepare the envelopes before printing.

Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed in landscape orientation, they will not feed properly.

Check 4: Confirm the paper source setting

* If the paper source setting is not changed since you purchased this printer, the paper source for plain paper is the Cassette.

Check 5: Remove the foreign object in the Cassette or the Manual Feed Slot

Check 6: Make sure that there are not any foreign objects in the Rear Tray

If the paper tears in the Rear Tray, see [ Paper Jams ] to remove it.

If there are any foreign objects in the Rear Tray, be sure to turn off the printer, unplug it from the power supply, then remove the foreign object.

Check 7: Clean the Paper Feed Roller

NOTE

Cleaning the Paper Feed Roller will wear the roller, so perform this procedure only when necessary.

Cleaning the Paper Feed Rollers

Cleans the paper feed roller. Perform feed roller cleaning when there are paper particles sticking to the paper feed roller and paper is not fed properly.

See[Cleaning the Paper Feed Rollers ]

Check 8: Is the Rear Cover closed completely?

Paper may be jammed if the Rear Cover is not closed completely. Close the Rear Cover completely.

Check 9: If A3 sized plain paper jams frequently near the paper out slot or is curled, select the Prevent paper jam setting

Set the Prevent paper jam in the printer driver only when A3 sized plain paper jams frequently near the paper out slot or is curled.

It results in lower printing speed or lower print quality if you are selecting the Prevent paper jam setting.

* Deactivate the Prevent paper jam setting once printing is complete. If not, this setting remains enabled for all subsequent print jobs.

Open the printer properties dialog box, and in Custom Settings in the Maintenance sheet, select the Prevent paper jam check box, and then click Send.

In the Canon IJ Printer Utility, select Custom Settings in the pop-up menu, select the Prevent paper jam check box, and then click Send.

rowdentheyou1993.blogspot.com

Source: https://id.canon/id/support/8200530200

Bagikan Artikel ini